Braces

This product is used to select your custom zipper location for product AA2 only. The standard location for the zippers are as follows:Left Ankle- Inside of AnkleRight Ankle - Outside of Ankle

Heat Moldable insert for the AB2 ABC Double Pull Lumbar Support.

The New ABC Groin and Hamstring Stabilizer is designed to help with groin, hamstring and quadricep strains. Its unique design helps the user to recover from these common and debilitating injuries. The product is available in a bilateral (both Legs) or unilateral (Right or Left) designs. The product wears like a one-legged short or the biliateral version wears like a short. It is recommended that the user use a compression garment underneath to help prevent any chance of chaffing or irritation.

Insert, children, back support, back, child back support,

The ABC Positive Control Knee Brace™ is made from 3/16” latex-free neoprene covered on both sides with nylon.

The ABC Ankle Support Sleeve™ is designed to help reduce swelling and increase ciruclation while providing very mild support.

The ABC Neoprene Ankle Support™ is made of 1/8" Neoprene with Nylon on two sides. It offers mild support and warmth to the ankle area.

The ABC Heel Support™ is designed to relieve heel pain by applying a counterforce pressure on the Achilles' TendonIt is made of 1/8” latex-free neoprene with a nylon coating on two sides and comes with removable 1/4” PPT horseshoe.

The ABC Dynamic Ankle Support System™ is designed to support the ankle area, while allowing the user to be active.

The Kallassy Ankle is for the most common injury in sports. Many top orthopedic surgeons, trainers, and therapists as the finest ankle support. It is made from Non-stretch lateral straps to resist inversion. It is made wtih non-stretch medial strap supports the arch and resists pronation. The brace allows for full dorsal and plantar flexion. It fits easily into athletic shoes.

The ABC Universal Lumbar Support is designed to support your back while providing warmth and compression.

The ABC Lumbar Support with Double Side Pulls™ is designed to support your back. It is designed to help with low back pain and provide support. Available for children and adults.

The ABC Calf Sleeve is used to support an injury calf muscle while providing heat and compression to increase circulation while lessening swelling.

The ABC Shin Splint Support™ is an excellent solution for Shin Splints. It is made from 1/8" latex-free neoprene which is coated with nylon on both sides. Two parallel tubular pads are sewn into the brace in the front of the brace.

ABC 17" High Tech Brace - Stability, Adjustability and Comfort.

The ABC Elbow Support is made from 1/8" latex-free neoprene and designed to support your elbow while supplying even pressure to lessen swelling.

The ABC Universal Elbow Strap™ is made from 1/8" latex-free neoprene with nylon on two sides. It also has a 2" circumferential, pressure adjusting strap for more support.

The ABC Tennis/Hockey Elbow Brace is made of 1/8" latex-free neoprene coated on the inside and outside with nylon. A circumferential loop and hook strapping system is attached to the brace to offer support and pressure.

The ABC Tennis/Hockey Elbow Brace is made of 1/8" latex-free neoprene coated on the inside and outside with nylon. A circumferential loop and hook strapping system is attached to the brace to offer support and pressure.

Product Coming Soon!

This Knee Sleeve is is made from 3/16" neoprene with nylon on both sides. The design includes a felt donut.

The ABC Hyperextension Elbow Support ™ is made from 1/8" latex-free neoprene with two "loop and lock" criss-crossed straps to help prevent the elbow from hyperextension.

Support the Thigh and Hamstring. Great for helping you through Thigh and Hamstring injuries as well as Quadricep Pulls.

The ABC Patella Trackilzer™ is made of 1/8" UBL plush material for comfort and fit on one side and ABC Tiger's Tooth™, a non-slip neoprene opposing side to limit or prevent movement of the support. This one product will work for both runner's knee and IT Band problems. No reason to buy two different products anymore.

This universal wrap-around knee pad is made of 1/8 UBL plush material on one side and the otherside with neoprene. A patellar opening aligns the knee cap and provides comfort. A neoprene buttress has dynamic pull tabs for the user to adjust the pressure.

The ABC Knee Criss-Cross Stablizer™ is made from 3/16" neoprene with nylon on two sides. The knee brace has four, 2" wide adjustable elastic straps for added medial and lateral support and an adjustable 1/4" felt buttress.

The ABC Knee Brace with Patellar Control™ is made of 3/16” latex-free neoprene with nylon on both sides. There is a patella opening for brace positioning and comfort. The brace also incorporates a universal felt buttress. The brace includes upper and lower circumferential Velcro™ straps for support and additional straps above and below near the patella for yet more support. The multi-position hinges are covered and "boot-pulls" are included to help pull on the brace.

The ABC Knee Brace with Patellar Control™ is made of 3/16” latex-free neoprene with nylon on both sides. This is the same brace as the [AKS14] ABC Knee Brace with Patellar Control with some added support and control features as described below. There is a patella opening for brace positioning and comfort. The brace also incorporates a universal felt buttress. The brace includes upper and lower circumferential Velcro™ straps for support and additional straps above and below near the patella for yet more support. The multi-position hinges are covered and "boot-pulls" are included to help pull on the brace. This brace has an additional option for greater stability. This brace incorporates the features of the criss-cross stabilization system found in [AKS13] for more knee support.

The ABC Patellar Sustainer Knee Brace is made of 3/16” latex-free neoprene with nylon on two side. There is a patellar opening for positioning and comfort and a universal felt buttress. Also available in ABC Cool Tech material.

This ABC Knee Brace is designed using 3/16" latex-free neoprene with nylon on both sides. The brace is designed to be opened up and velcroed around the leg. This features also ease of application and avoids the difficulty associated with pulling on.

This ABC Pro Knee Brace comes with a High Tech adjustable hinge. This hinge is designed with extension and flexion stops at 0°, 15°, 30°, 45°, 60°, and 90°. The brace is designed using 3/16" latex-free neoprene with nylon on both sides. The brace is designed to be opened up and velcroed around the leg. This features also ease of application and avoids the difficulty associated with pulling on a brace. It is ideal for all ages. Large and comfable popliteal area (Opening behind knee). An elastic, adjustable strap has been added to the back of the brace to prevent a tourniquet effect in the popliteal area. On the 13" version of the brace, further support is added by using two adjustable velcro brand 2" "loop and lock" straps immediately above and below the patellar opening.

This ABC Knee Brace is designed using 3/16" Neoprene with nylon on both sides and two medial and lateral neoprene-covered spiral steel stays.

This ABC Pro Knee Brace with Multi-position hinge is designed using 3/16" Neoprene with nylon on both sides and two medial and lateral neoprene-covered spiral steel stays. The hinge itself has extension stops at 0°, 15°, 30­° and 45°. This brace comes in 5 different options and 2 different lengths.

This is the same brace as the ABC Pro Knee Brace except the hinge has been replaced with medial and lateral Stays. The brace is designed to be opened up and Velcroed around the leg. This features also ease of application and avoids the difficulty associated with pulling on a brace. It is ideal for all ages. Comes in sizes for adults and child and colors.

The "Swede" is a dynamic Knee Brace made of 1/8" latex-free neoprene covered on the inside and outside with nylon. A patellar opening is present for brace and patella positioning and comfort. A universal neoprene crescent-shaped buttress is included for patella control. An upper and lower cirumferential strap is included for additional support.

This ABC Conical Knee Brace™ features a 3/16" latex-free neoprene body with nylon on both sides. It is designed to fit a cone-shaped leg or hard-to-fit leg. A patellar opening is included for positioning of the knee cap and comfort. The brace has an anterior wrap around closure on the top and a closed bottom around the calf area. This allows for a better fit for a cone-shaped leg. There are upper and lower circumferential straps for support with posterior adjustable elastic segment. It comes with an open popliteal for added comfort. Also, includes stainless steel adjustable and covered hinges with hyperextension stops. Boot pulls are provided to make it easier to put on the brace.

This ABC Conical Knee Brace with High Tech Hinge is features 3/16" latex-free Neoprene with nylon on both sides. It is specially designed to fit a cone-shaped leg or hard-to-fit leg.

This ABC Conical Knee Brace with multi-position hinge is made of 3/16" latex-free Neoprene with nylon on both sides. It is specially designed to fit a cone-shaped leg or hard-to-fit leg. The multi-position hinge comes with 0, 15, 30 and 45 degree extension stops.

This ABC Conical Knee Brace with Stays features a 3/16" latex-free neoprene body with nylon on both sides. It is designed to fit a cone-shaped leg or hard-to-fit leg. A patellar opening is included for positioning of the knee cap and comfort. The brace has an anterior wrap around closure on the top and a closed bottom around the calf area. This allows for a better fit for a cone-shaped leg. There are upper and lower circumferential straps for support with posterior adjustable elastic segment. It comes with an open popliteal for added comfort. Additional support is added by including spiral stays that are have protected dipped caps. Boot pulls are provided to make it easier to put on the brace.

This ABC Pro Knee Brace is the 17" version of the Pro Knee Brace is designed using 3/16" latex-free neoprene with nylon on both sides.

This ABC Pro Knee Brace™ is the 17" version of the Pro Knee Brace but made from ABC Cool Tech materical. ABC Cool Tech material for those who have to wear their supports for a long period of time, or that have heat or allergy issues with neoprene.

It is longer and thus adds more support. It is designed using 3/16" latex-free neoprene with nylon on both sides. The brace is designed to be opened up and Velcroed around the leg. This features also ease of application and avoids the difficulty associated with pulling on a brace. It is ideal for all ages.

The brace comes with a polycentric, high tech hinge with easy to set flexion and extension stops. These extension stops allow for full range of motion control. The hinge arms themselves are made from aircraft aluminum. 

There is a large and comfortable popliteal area (Opening behind knee) for comfort and flexibility. An elastic, adjustable strap has been added to the back of the brace to prevent a tourniquet effect in the popliteal area.  This brace has four (4) total adjustable Velcro brand 2" "loop and lock" straps are included. Two (2) are located immediately above and two (2) immediately below the patella opening for additional support. The straps have an easy-opening tabs and finger loops. There is a patellar opening which helps with positioning the brace and for comfort to the user.

The ABC 17” High Tech Knee Brace™ is made of 3/16” latex-free ABC Cool Tech material. This is the cooler version of the AKS20 for those who wish to wear their supports for a long period of time, or who have heat or allergy issues with neoprene. This material is 25% cooler than neoprene. This brace material is only available in black.

This ABC Conical Knee Brace™ features a 3/16" latex-free neoprene body with nylon on both sides. It is designed to fit a cone-shaped leg or hard-to-fit leg. A patellar opening is included for positioning of the knee cap and comfort. The brace has an anterior wrap around closure on the top and a closed bottom around the calf area. This allows for a better fit for a cone-shaped leg. There are upper and lower circumferential straps for support with posterior adjustable elastic segment. It comes with an open popliteal for added comfort. Also, includes stainless steel adjustable and covered hinges with hyperextension stops. Boot pulls are provided to make it easier to put on the brace.

This ABC Conical Knee Brace™ features a 3/16" latex-free neoprene body with nylon on both sides. It is designed to fit a cone-shaped leg or hard-to-fit leg. A patellar opening is included for positioning of the knee cap and comfort. The brace has an anterior wrap around closure on the top and a closed bottom around the calf area. This allows for a better fit for a cone-shaped leg. There are upper and lower circumferential straps for support with posterior adjustable elastic segment. It comes with an open popliteal for added comfort. Also, includes stainless steel adjustable and covered hinges with hyperextension stops. Boot pulls are provided to make it easier to put on the brace.

This ABC Simple Knee Sleeve is made of 1/8" latex-free neoprene sleeve with an oval anterior pad and a patellar cut-out.

This ABC Simple Knee Sleeve is made of 1/8" latex-free neoprene sleeve with a patellar cut-out but no anterior pad.

This ABC Simple Knee Sleeve is made of 1/8" latex-free neoprene sleeve with no patellar cut-out and no anterior pad.

This ABC Simple Knee Sleeve is made of 1/8" latex-free neoprene sleeve. It it a simple sleeve. It does NOT have an anterior pad and no patellar cut-out. The neoprene is covered with nylon on two sides. The sleeve is 13" in length. The patellar cut out is use for positioning of the sleeve and to reduce pressure around the patellar.